SCF series cartridges feature strong natural hydrophobicity, high temperature resistance and corrosion resistance, and are widely used as vent filter and for filtration of highly corrosive liquids.
Applications
Vent filters for sterile packaging
Sterile filtration of corrosive gas
Sterile filtration of compressed air and nitrogen
Sterile filtration of strong oxidizing liquid
Product features
High temperature resistance, steam resistance
Extensive chemical compatibility, used for a variety of filtration processes in pharmaceutical manufacturing
Naturally hydrophobic, high flux, low pressure drop
100% integrity test, ensures product quality
Flow curves
MoC | |
Membrane material | Hydrophobic PTFE |
Center rod/housing/end cap | Polypropylene |
Supporting layer | Polypropylene |
Sealing ring | Refer to ordering information |
Surface area | 0.5m2/10 inch |
Working condition | |
Max. working temperature | 80℃(0.173MPa) |
Max. working pressure difference | 0.42MPa (25℃) |
0.21MPa (80℃) | |
Autoclave | 121℃ (30min, 5 times) |
Biosafety | |
Endotoxin | ＜0.25EU/ml |
Biosafety | Meets USP<87> and USP<88> biosafety requirements |
Pore size μm | Bubble point (bar) ≥ | Water intrusion (ml/min) ≤ |
0.2 | 0.126 | 1.3@0.26MPa |
Product number key of hydrophobic PTFE disc filter
Housing model | Membrane material | Pore size (μm) | Type | Length (inch) | Inlet | Outlet |
DS=Disc filter | SCF=Hydrophobic PTFE | 092=0.2 | P=Pharmaceutical grade | 02=2 | D=1/4" HB | D=1/4" HB |
Product number key of hydrophobic PTFE CA series capsule filter
Housing model | Membrane material | Pore size (μm) | Type | Length (inch) | Structure type | Inlet | Outlet | Sealing ring material |
CA=Diameter 110 capsule filter | SCF=Hydrophobic PTFE | 092=0.2 | P=Pharmaceutical grade | 05=5 10=10 20=20 30=30 | L=Up-in & down-out | H=1"-1.5" TC | H=1"-1.5" TC F=1/2" HB | S=Silicone V=Fluorelastomer |
Technical parameter of hydrophobic PTFE CA series capsule filter
Material | Series | Size code | Single/dual layer | Surface area(㎡)≥ | Pure water flow 0.2 μm ΔP=0.01MPa | Water intrusion ml/min (0.2 μm) | Bubble point MPa |
Hydrophobic PTFE | CA capsule filter | P05 | Single layer | 0.3 | ≥3.5L/min | ≤0.65@0.26MPa | ≥0.126 MPa (Absolute ethanol) |
P10 | Single layer | 0.6 | ≥7L/min | ≤1.3@0.26MPa | |||
P20 | Single layer | 1.2 | ≥14L/min | ≤2.6@0.26MPa | |||
P30 | Single layer | 1.8 | ≥21L/min | ≤3.9@0.26MPa |
Product number key of hydrophobic PTFE CB series capsule filter
| Housing model | Membrane material | Pore size (μm) | Type | Length (inch) | Structure type | Inlet | Outlet |
CB=Diameter 70 capsule filter | SCF=Hydrophobic PTFE | 092=0.2 | P= Pharmaceutical grade | H1=1 01=1 1H=1.5 02=2.5 05=5 | L=Up-in & down-out | A=1/4"NPT D=1/4" HB E=3/8" HB F=1/2" HB G=1/2" TC H=1-1.5" TC J=1/4-1/2" HB | A=1/4"NPT D=1/4" HB E=3/8" HB F=1/2" HB G=1/2" TC H=1-1.5" TC J=1/4-1/2" HB |
Technical parameter of hydrophobic PTFE CB series capsule filter
Material | Series | Size code | Single/dual layer | Surface area(㎡)≥ | Pure water flow 0.2 μm ΔP=0.01MPa | Water intrusion ml/min (0.2 μm) | Bubble point MPa |
Hydrophobic PTFE | CB capsule filter | PH1 | Single layer | 0.02 | ≥0.22L/min | ≤0.04@0.26MPa | ≥0.126 MPa (Absolute ethanol) |
P01 | Single layer | 0.04 | ≥0.43L/min | ≤1.08@0.26MPa | |||
P1H | Single layer | 0.06 | ≥0.75L/min | ≤0.14@0.26MPa | |||
P02 | Single layer | 0.12 | ≥1.4L/min | ≤0.26@0.26MPa | |||
P05 | Single layer | 0.2 | ≥2.5L/min | ≤0.48@0.26MPa |
Product number key of hydrophobic PTFE CC series capsule filter
| Housing model | Membrane material | Pore size (μm) | Type | Length (inch) | Structure type | Inlet | Outlet | Sealing ring material |
CC=Diameter 55 capsule filter | SCF=Hydrophobic PTFE | 092=0.2 | P=Pharmaceutical grade | 02=2 | L=Up-in & down-out | H=1"-1.5" TC | H=1"-1.5" TC F=1/2" HB | S=Silicone V=Fluorelastomer |
Product number key of hydrophobic PTFE cartridge
Membrane material | Pore size (μm) | Type | Length (inch) | Connection type | Sealing type | Sealing ring material |
SCF=Hydrophobic PTFE | 092=0.2 | P=Pharmaceutical grade | 05=5 10=10 20=20 30=30 40=40 | A=226 B=226 steel liner D=222 E=222 steel liner H=215 K=220 | P=Flat cap R=”8”shape tail K=220 | S=Silicone E=EPDM V=Fluorelastomer |
Technical parameter of hydrophobic PTFE cartridge | ||||||
Material | Series | Size code | Single/dual layer | Surface area(㎡)≥ | Pure water flow 0.2 μm ΔP=0.01MPa | Water intrusion ml/min(0.2 μm) | Bubble point MPa |
Hydrophobic PTFE | Cartridge | P05 | Single layer | 0.3 | ≥3.5L/min | ≤0.65@0.26MPa | ≥0.126 MPa (Absolute ethanol) |
P10 | Single layer | 0.6 | ≥7L/min | ≤1.3@0.26MPa | |||
P20 | Single layer | 1.2 | ≥14L/min | ≤2.6@0.26MPa | |||
P30 | Single layer | 1.8 | ≥21L/min | ≤3.9@0.26MPa | |||
P40 | Single layer | 2.4 | ≥28L/min | ≤5.2@0.26MPa |
Copyright © Shanghai Duoning Biotechnology Co., Ltd. All Rights Reserved Sitemap | Technical Support: 
Message-
